The first case that was ever built at C&C Cases was a Pedalboard case. We consider this item one of the most essential to a musicians performance onstage. They take up very little room in your car or truck and are a breeze to use. The following images show a few of the fundamental areas of this product.   The above image shows a single level velcro compatible board. The thickness of the raw pedalboard before it is covered is 24mm including a12mm thick leads cavity underneath the board surface. The total thickness including the material covering is 30mm. The above image shows a dual level pedalboard. The main board size in this example measures 600mm wide x 340mm deep x 24mm thick including the 12mm thick leads cavity underneath the board surface. The second level is 450mm wide x 170mm deep x 40mm thick. These boards have pre-drilled cable access holes in both the main board and the second level. The area underneath the second level has a large routed opening. Please note that dual level pedalboards are only available in a black painted finish. The above image shows the internal area of the case base. This example was lined with velcro compatible material in the bottom of the case and had no seperate pedalboard. Just another way of doing things. The above image shows the pedalboard with 12mm leads cavity in place in the case base. Our pedalboards are designed to be used in the case during your gig. We often use cable ties on our in-house pedalboards. This eliminates the need to drill holes through the pedal base plates in order to bolt the pedals in place. We can supply industrial grade cable ties with our Export boards if required by the customer. The above example shows how the leads cavity underneath the main board surface works. This is a painted board. Our velcro boards with 12mm thick leads cavities also work in the same way. The above example is our Model A case. The maximum allowable internal height is 97mm (less the board and trimmings, etc). The above example is our Model B case. The maximum allowable internal height is 143mm (less the board and trimmings, etc). The above example is our 6 Panel case model. The advantage is a low profile base with a fully customized lid height.